Description
Technical
Specifications
Inputs / Outputs
| Total inputs | 20 |
|---|---|
| Inputs / outputs | Main audio I/O on the central module: mic input, headphone output, loudspeaker connections, GPIO, D-sub, Dante/MADI |
Processing
| Mix buses | 11 |
|---|---|
| DSP engine | Series 52 DSP core, 40-bit floating point |
| Max sample rate | 48 kHz |
| Architecture | Compact modular broadcast console, chainable tabletop modules, self-op mode |
| Modularity and expansion | Central module (52-5614): 4 faders + monitoring/talkback section; fader modules (52-5620): 6 faders; 4 to 16 faders total |
| Channels | 20 mono or stereo channels, 3-band parametric EQ, subsonic filter, dynamics and limiter per channel |
| Buses | 11 stereo PGM busses, aux busses, 6 clean feeds (mix-minus), 4 monitoring busses, integrated routing matrix |
| DSP engine (details) | High-performance 40-bit floating-point DSP core; Series 52 firmware shared with TX2/RX2 |
Surface
| Physical faders | 16 |
|---|---|
| Motorized faders | Yes |
| Touchscreen | Yes |
| Faders | 100 mm dust-protected motorised faders, second layer up to 20 channels |
| Screens | 10.1-inch multitouch display per module |
Networking
| Networking & protocols | Dante / MADI / AES/EBU / Ravenna |
|---|
Other
| Price | Features extended via license codes: extra faders, busses and clean feeds, loudness metering, profanity delay, Views and Assist apps |
|---|---|
| Variants and configurations | Configuration via SX2Config (a simplified version of Toolbox) |
Strip & details
Rotate your phone to landscape for a better view of the strip.
Rotate your phone to landscape for a better view of the strip.
Rotate your phone to landscape for a better view of the strip.
Rotate your phone to landscape for a better view of the strip.
Rotate your phone to landscape for a better view of the strip.
Software
DHD Toolbox / SX2ConfigConfiguration software for DHD consoles; SX2Config is its simplified version for the SX2.Download
Other screenshots











Documents
Editorial & artists
Our take
History & design
The DHD SX2 is a compact digital mixing console for radio and broadcast, introduced in 2018 by German manufacturer DHD. Designed as a price-optimised product, it targets on-air studios, audio workstations and smaller OB vans. The console is made of separate tabletop modules that chain together: a central module (52-5614) combining four faders with a monitoring, talkback and central-controls section, and fader modules (52-5620) of six channels each, for a total of 4 to 16 faders.
All faders are motorised (100 mm, dust-protected) and offer a second layer of up to 20 channels. Each module has a 10.1-inch multitouch display. The central module carries the main audio I/O (mic input, headphone output, direct loudspeaker connections, GPIO, D-sub and network), cutting cabling and rack space.
The SX2 runs the Series 52 firmware shared with the TX2 and RX2, and is configured with SX2Config, a simplified version of Toolbox. Its 40-bit floating-point DSP core handles 20 mono or stereo channels (3-band parametric EQ, subsonic filter, dynamics, limiter), 11 stereo PGM busses, six clean feeds and four monitoring busses. Extra features (faders, busses, clean feeds, loudness metering, profanity delay, Views and Assist apps) are enabled through license codes.
Links
Some merchant links are affiliate links. Purchases may support Digital Mixing at no extra cost.
Documents are archived locally for preservation. Source credited. Takedown requests: [email protected]













