DHD

DHD RX2

DHD's modular radio and TV console

Description

The RX2 is DHD's modular standard for demanding broadcast: every section carries a 10.1-inch touchscreen, the interface is shaped button by button in Toolbox, and the console scales from 6 faders for a small studio to 96 for a large control room. The central section leans on assignable hardware buttons and a 7-inch vertical display with adaptive labels, plus talkback mic, ambient-light sensor and illuminated encoders. On-air radio, master control room or OB van: it adapts to the studio rather than the other way round.

Technical

Specifications

Inputs / Outputs

Inputs / outputsMain audio I/O on the central module (mic input, headphone output, loudspeaker connections); network and audio I/O via DHD cores

Processing

DSP engineSeries 52 DSP core, 40-bit floating point
Max sample rate48 kHz
ArchitectureHigh-end modular console for radio and TV: on-air studios, master control rooms, OB vehicles
Modularity and expansionCentral module (52-5810) and fader modules (52-5820), each with a 10.1-inch touchscreen; from 6 to 96 faders
DSP engine (details)40-bit floating-point DSP core, Series 52 firmware shared with SX2/TX2; EQ, dynamics, clean feeds, routing matrix

Surface

Physical faders96
Motorized fadersYes
TouchscreenYes
Screens10.1-inch touchscreen per section (integrated, no PC), multilingual Unicode support
ErgonomicsCentral section: assignable hardware buttons, 7-inch vertical touchscreen with adaptive labels, illuminated main encoder, talkback mic with preamp, ambient-light sensor
Faders100 mm motorised faders, silent RGB buttons with per-channel functions (ON, OFF, PFL, ACCESS, LAYER)

Networking

Networking & protocolsDante / MADI / AES/EBU / Ravenna

Other

Variants and configurationsFully configurable interface via Toolbox: custom buttons, meters and settings

Editorial & artists

Our take