AMS Neve

88RS User Manual

Manual · 94 pages · PDF · 4.2 MB

Console: AMS Neve 88RS

Contents

  1. CONTENTS1
  2. INTRODUCTION3
  3. System Information 1:13
  4. POWER UP AND POWER DOWN SEQUENCE4
  5. Power Up Procedure: 2:14
  6. Power Down Procedure 2:36
  7. CONSOLE CONFIGURATION8
  8. Multitrack Recording 2:69
  9. Mixdown 2:811
  10. Overdubbing 2:1013
  11. Tape and Cues Post EQ 2:1821
  12. Broadcast 2:2023
  13. THE 88RS CONSOLE SURFACE25
  14. The 88RS Channel Module 3:327
  15. Channel Fader Module 3:1135
  16. SOLO & MASTER CUT SYSTEM36
  17. 4:136
  18. Solo System 4:136
  19. Cut Grouping Facility 4:439
  20. MONITOR & FACILITIES SECTION40
  21. Oscillator and Signal level 5:140
  22. Auxiliary Master Section 5:241
  23. Cue Mix System 5:443
  24. Rev Returns 5:645
  25. Monitor Panel 5:746
  26. 5:1453
  27. 2 Track Mixer 5:2160
  28. 5:2261
  29. 5:2362
  30. Monitor and Facilities Fader Section 5:2362
  31. METERING64
  32. Multitrack Meters 6:164
  33. Auxiliary Meters 6:366
  34. Multitrack Meter Controls 6:467
  35. Monitor 6T Output Meters 6:568
  36. 6:669
  37. Monitor 8T Output Meters (optional) 6:669
  38. Encore Screen 6:871
  39. 6:871
  40. 6:871
  41. SURROUND: ROUTING & MONITORING72
  42. Reassign Matrix Panel 7:172
  43. Reassign Matrix Modes 7:576
  44. Automated Panning 7:879
  45. Optional Joystick Module 7:980
  46. AUTOMATION & MACHINE CONTROL84
  47. Global Master Automation 8:184
  48. Events Master 8:285
  49. Automation Panel 8:386
  50. GLOSSARY87
  51. Terms Used In This Manual 9:187
  52. Index1
  53. !1
  54. 2 Track Mixer 5:2160
  55. 2T 5:2160
  56. 2T 1-4 O/P 6:669
  57. 2T TO MON 5:2261
  58. 6dB DUMP 6:467
  59. 6T Mix 5:1251
  60. 8T Aux Meter Panel 6:366
  61. 8T Meters 6:6 - 6:769
  62. 8T MIX O/P 6:770
  63. A1
  64. AFL (After Fade Listen), glossary entry 9:187
  65. Ancillary Switches 5:2059
  66. ART MIXED CUE 5:1857
  67. Attenuation, glossary entry 9:187
  68. Audio grouping, glossary entry 9:187
  69. Automated Mute Groups 4:439
  70. Automated Panning 7:879
  71. AUTOMATION & MACHINE CONTROL 8:1 - 8:384
  72. Automation masters 5:2362
  73. Automation Panel 8:386
  74. Aux 1 to 8 5:1251
  75. Aux, glossary entry 9:187
  76. Auxiliaries 3:731
  77. Auxiliary Master Section 5:2 - 5:341
  78. Auxiliary Meters 6:366
  79. B1
  80. Balance Control 5:948
  81. Bell, glossary entry 9:187
  82. Bounce, glossary entry 9:187
  83. Broadcast 2:20 - 2:21, 5:1423
  84. Bus, glossary entry 9:288
  85. C1
  86. calibrated level 5:140
  87. CH.OP CH.IP 2:8, 2:20, 3:911
  88. Channel Fader Module 3:1135
  89. Channel Input 3:933
  90. channel input to MT meter 6:164
  91. Channel Module 3:3 - 3:1027
  92. Channel O/D 2:1215
  93. Channel O/D with Mixed Cue 2:1619
  94. Channel Output 3:933
  95. Channel Status 3:9, 6:233
  96. Channel, glossary entry 9:288
  97. Channel/Monitor Safe 3:1034
  98. Clipping, glossary entry 9:288
  99. Combining the monitor and channel solo systems 4:237
  100. Comms, glossary entry 9:288
  101. CONSOLE CONFIGURATION 2:5 - 2:218
  102. CONSOLE SURFACE 3:1 - 3:1125
  103. Console Surface 6T 88RS 3:125
  104. Console Surface 8T 88RSP 3:226
  105. CONT MIX 5:1150
  106. Control grouping, glossary entry 9:288
  107. Control Room Monitor Level Controls 5:948
  108. Control room monitor, glossary entry 9:288
  109. Control Room Speaker Selector 5:847
  110. Cue 1 & 2 5:1251
  111. Cue 1/2 5:1251
  112. Cue 3/4 5:1251
  113. Cue Mix System 5:4 - 5:543
  114. Cue Sends 5:1857
  115. Cue, glossary entry 9:288
  116. CUES POST EQ 5:1857
  117. Cues Post EQ 2:18 - 2:1921
  118. Cut Grouping Facility 4:439
  119. Cut Solo (with AFL or PFL) 4:237
  120. Cut Solo Indication 4:237