DiGiCo D5 - User manual (FR)

Contents

1. D5 Contents5
2. 1.1 The Console11
3. 1.2 Hardware11
4. 1.2 Hardware Configuration13
5. 1.2.1 Connections13
6. 1.2.2 The DiGiConfig Program14
7. 1.3 Getting Started15
8. 1.3.1 Consoles and Racks17
9. 1.3.2 Loading the Template Session18
10. 1.3.3 Selecting an Input Source18
11. 1.3.4 Routing the Channel Signal20
12. 1.3.5 Routing Busses To Outputs21
13. 1.3.6 Save As New File22
14. 1.3.7 Save Session22
15. 1.3.8 EQ23
16. 1.3.9 Dynamics24
17. 1.3.10 Auxiliaries24
18. 1.3.11 The Matrix25
19. 1.3.12 Control Groups26
20. 1.3.12 Master Fader Banks27
21. 1.3.13 Monitoring28
22. 2.1 The Input Channels31
23. 2.1.1 Channel Assignment31
24. 2.1.2 Worksurface Channels31
25. 2.1.3 Input Screen - The Standard View32
26. 2.1.4 Input Meters32
27. 2.1.5 Assigning a Channel33
28. 2.2 Expanding a Processing Module33
29. 2.2.1 Input Module34
30. 2.2.2 Equaliser Module36
31. 2.2.3 Dynamics Module38
32. 2.2.4 Pan / Aux Module40
33. 2.2.5 Routing Module42
34. 2.2.6 The ALL Button45
35. 2.2.7 Undo / Redo Button45
36. 2.2.8 Channel LCD Function Buttons45
37. 2.3 Ganging48
38. 2.3.1 Creating a Gang48
39. 2.3.2 Clearing or Editing a Gang48
40. 2.3.3 How a Gang Works48
41. 2.4 Layout49
42. 2.4.1 External Screens49
43. 2.4.2 Overview Setup50
44. 2.4.3 Channel Banks50
45. 2.4.4 Master Banks51
46. 2.4.5 Move Channels52
47. 2.4.6 Copy Channels52
48. 2.4.7 Duplicate Channel53
49. 2.4.8 Channel Overview54
50. 3.1 Busses and Outputs57
51. 3.1.1 Buss Outputs Display57
52. 3.1.2 Expanding the Buss Output View58
53. 3.2 Output and Buss Controls58
54. 3.2.1 Label59
55. 3.2.2 Buss Control Button59
56. 3.2.3 Level Trim60
57. 3.2.4 Limiter60
58. 3.2.5 Mute60
59. 3.2.6 Meters60
60. 3.2.7 Output Channel Routing60
61. 3.2.8 Buss Signals as Input Sources61
62. 3.2.9 Headphones61
63. 3.2.10 Output Insert61
64. 3.3 The Matrix62
65. 4.1 Master Section65
66. 4.1.1 The Master Screen65
67. 4.1.2 The Menu Buttons66
68. 4.1.3 Console Security Settings67
69. 4.1.4 Consoles and Racks67
70. 4.2 Configuring the Console68
71. 4.2.1 Session Files Menu68
72. 4.2.2 The New Session Panel68
73. 4.2.3 Clearing Settings68
74. 4.2.4 The Load Session Button69
75. 4.2.5 The Save As New File Button70
76. 4.2.6 The Save Session Button70
77. 4.2.7 USB Data Port70
78. 4.2.8 Managing Presets70
79. 4.2.9 Monitoring71
80. 4.2.10 Master Section Meters73
81. 4.2.11 Meter Bridge Options73
82. 4.2.12 Meter Ballistics73
83. 4.2.13 Restart and Recovery74
84. 4.3 Talkback74
85. 4.3.1 Talkback Configuration Button75
86. 4.3.2 Talkback Mic Setup75
87. 4.3.3 The Talkback Mixer76
88. 4.3.4 Talkback Presets76
89. 4.4 Control Groups76
90. 4.4.1 Creating Control Groups76
91. 4.4.2 Naming Control Groups77
92. 4.4.3 Mode Option77
93. 4.5 Master LCD Function Buttons77
94. 4.6 Snapshots81
95. 4.6.1 Master and Relative Snapshots82
96. 4.6.2 Storing a Snapshot82
97. 4.6.3 Recalling a Snapshot83
98. 4.6.4 Replacing a Snapshot83
99. 4.6.5 Update Master83
100. 4.6.6 Editing Multiple Snapshots83
101. 4.6.7 Moving a Snapshot84
102. 4.6.8 Renaming a Snapshot84
103. 4.6.9 Renumbering Snapshots ..............................................................84
104. 4.6.10 Deleting a Snapshot84
105. 4.6.11 Snapshot Undo84
106. 4.6.12 The Snapshot Scope Editor85
107. 4.6.13 Channel Scope85
108. 4.6.14 Controller Scope85
109. 4.6.15 Snapshot Timing86
110. 4.6.16 Snapshots and MIDI87
111. 4.6.17 MIDI Patches87
112. 4.7 Transport / Timecode Configuration89
113. 4.8 Audio Synchronisation90
114. 4.8.1 Internal Sync - Console As Master90
115. 4.8.2 External Sync90
116. 4.8.3 External Sync Sources91
117. 4.8.4 Sample Rate and Conversion91
118. 5.1 Configure Effects94
119. 5.1.1 Selecting Effects94
120. 5.1.2 Effects and Routing95