Calrec Summa user manual (V8.2)

Contents

1. CONTENTS3
2. PRODUCT INFORMATION13
3. INFORMATION14
4. Repairs15
5. Standard of Service15
6. Serial Numbers15
7. After Sales Modifications15
8. Installation16
9. Service Personnel16
10. Third Party Equipment16
11. ESD (Static) Handling Procedures16
12. RoHS Legislation16
13. ISO 9001 and RAB Registered16
14. HEALTH AND SAFETY18
15. Important Safety Instructions:18
16. Cleaning18
17. Explanation of Warning Symbols18
18. Earthing19
19. Lithium Battery Replacement19
20. SYSTEM OVERVIEW21
21. Fader Strip23
22. Fader Display24
23. Control Cell25
24. Control Modes26
25. Parameter Adjust27
26. Console Monitors28
27. Studio Monitors29
28. Linking Paths29
29. Surface Layers30
30. Surface Reset30
31. USB Ports31
32. User Buttons31
33. TOUCH INTERFACE32
34. Touch Display Views32
35. INPUTS, OUTPUTS AND BUSES34
36. Identifying Paths34
37. Inputs34
38. Buses35
39. Bus Outputs36
40. Path Outputs36
41. Console Outputs36
42. Inserts37
43. HYDRA PATCHBAYS39
44. Console Specific or Shared39
45. Remote Patching39
46. Port Sharing40
47. Unpatching41
48. Hydra2 Patchbays at different sample rates41
49. INTERFACING STYLES42
50. Physical Controls42
51. Touch Display42
52. CONTROL MODES44
53. Access Mode44
54. Strip Modes44
55. Strip Mode Controls45
56. PRESETS46
57. Creating a Preset46
58. Loading a Preset47
59. Backing Up and Restoring Presets47
60. To restore a Preset from an external drive:47
61. Editing a Preset47
62. Pooled Resources48
63. COPY AND PASTE49
64. It’s quick and easy to copy properties from one path and paste them to another:49
65. LAYERS50
66. Layer Switching Options50
67. Surface Layer Pop-up51
68. SETTING UP53
69. GENERAL SETTINGS54
70. General Settings54
71. Surround Leg Suffixes55
72. Date and Time56
73. License and Logs56
74. ENERGY SAVER57
75. Brightness57
76. Dark Mode57
77. SYNCHRONISATION58
78. Synchronisation at different sample rates:58
79. Reset to First Source60
80. Sources and Frame-Rates61
81. EDITING THE NETWORK62
82. Viewing Resources62
83. Adding and Removing Resources63
84. SHOWS64
85. Entering the Shows List66
86. Active Show66
87. Loading a Show66
88. Setting up a New Show66
89. Duplicating a Show67
90. Deleting a Show67
91. Editing a Show67
92. Moving Shows between Summa Systems with 180 and 128 channels67
93. Show Templates—Admin Only67
94. Setting Up and Editing Templates—Admin Only67
95. Updating Templates—Admin Only67
96. Backing Up Shows68
97. Restoring Shows68
98. Capacity68
99. Settings Stored within Shows68
100. MEMORIES70
101. Loading a User Memory70
102. Creating a new User Memory70
103. Updating a User Memory70
104. Creating Multiple User Memories70
105. Storage Capacity70
106. Memory Isolation71
107. Getting signals in and out75
108. FADER LAYOUT76
109. Attaching a Path to a Fader77
110. Settings77
111. Editing Labels79
112. Port Labels79
113. Cloning Paths79
114. Moving Paths to Different Faders79
115. Deleting Paths from Faders80
116. Lock a Fader to the Surface80
117. I/O BOXES & HYDRA PATCHBAYS SAMPLE RATE SELECTION IN H2O81
118. Consoles at Different Sample Rates81
119. I/O and Hydra2 Patchbays at Different Sample Rates81
120. INPUT AND OUTPUT PATCHING82