Mode d'emploi TM-D4000

Sommaire

1. TM-D40001
2. Ü2
3. Ø2
4. Ÿ2
5. 03-Introduction.fm.pdf
6. 1 - Introduction8
7. 1.1 Features8
8. 1.2 About this manual8
9. 1.2.1 How this manual is arranged9
10. 1.3 Expansion cards9
11. IF-TD400010
12. IF-AE400010
13. IF-LP400010
14. IF-AD400010
15. 1.3.1 Fitting the interface cards10
16. 1.3.2 Input channel numbering11
17. 1.3.3 Output busses11
18. 1.3.4 Direct out11
19. 1.4 Word clock issues12
20. 1.5 Effects and monitoring12
21. 04-PRINC~UY.FM.pdf
22. 2 - Principles of operation13
23. 2.1 User interface13
24. 2.2 Road map13
25. 2.3 Using the PODs14
26. 2.3.1 Selecting screens14
27. 2.3.2 Navigation in screens15
28. 2.3.3 Using the JOG dial15
29. 2.3.4 One channel or one parameter?15
30. 2.3.5 Selecting channels16
31. 2.4 Fader layers16
32. 2.4.1 Turning fader motors on and off17
33. 2.4.2 Physical and logical faders17
34. 05-SYSTE~ZJ.FM.pdf
35. 3 - System setup18
36. 3.1 I/O setup18
37. 3.1.1 STEREO OUT settings18
38. 3.1.2 Consumer options19
39. 3.1.3 Word length and dithering19
40. 3.2 CLOCK setup19
41. 3.2.1 Selecting clock frequencies20
42. 3.2.2 Clock check21
43. 3.2.3 Clock settings (other)21
44. 3.2.4 Clock tolerance21
45. 3.3 Option setup21
46. 3.3.1 Location display mode22
47. 3.3.2 Timecode source22
48. 3.3.3 Preferences22
49. 3.3.4 Fader select22
50. 3.3.5 Select MODULE return22
51. 3.3.6 Select link22
52. 3.3.7 Dial edit22
53. 3.3.8 Automation fader inhibit22
54. 3.3.9 Balance level22
55. 3.3.10 Oscillator22
56. 3.3.11 Meter ballistics22
57. 06-MODUL~YJ.FM.pdf
58. 4 - Module operations23
59. 4.1 Module features and control23
60. 4.1.1 Stereo out module23
61. 4.1.2 Control of module parameters23
62. 4.2 Stereo linking24
63. 4.2.1 Using the ST LINK key to link channels24
64. 4.2.2 Using the SEL keys to link channels24
65. 4.3 Equalization25
66. 4.4 Channel-to-buss assignments25
67. 4.4.1 Using the MODULE screen for buss assignment25
68. 4.4.2 Using the ASSIGN key for buss assignment26
69. 4.5 Aux sends26
70. 4.5.1 Using the MODULE screen to set send levels26
71. 4.5.2 Using AUX keys to set send levels26
72. 4.6 Dynamics processor settings27
73. 4.6.1 Assigning a processor to a module28
74. 4.6.2 Using the MODULE key to make dynamics processor settings28
75. 4.6.3 Using the DYNAMICS key to make dynamics processor settings28
76. 4.6.4 Compressor/limiter settings28
77. 4.6.5 Gate settings29
78. 4.6.6 Linked channels29
79. 4.7 Pan and balance29
80. 4.7.1 Using the MODULE key to set pan and balance29
81. 4.7.2 Using the PAN/BAL key30
82. 4.8 Pad and phase(F)30
83. 4.8.1 Using the MODULE screen30
84. 4.8.2 Using the PAD/phase key30
85. 4.9 Fader and cut groups31
86. 4.9.1 Making group settings31
87. 4.9.2 Clearing group settings31
88. 4.10 Checking fader and cut status31
89. 4.10.1 Resetting faders to 0dB32
90. 4.10.2 Buss and Aux send metering32
91. 4.11 Buss delay32
92. 4.11.1 Global delay setting33
93. 4.12 MODULE screen (miscellaneous)33
94. 4.12.1 Meter pickoff point33
95. 4.12.2 Other information33
96. 4.13 Soloing33
97. 07-MONIT~FM.FM.pdf
98. 5 - Monitoring34
99. 5.1 CR and STUDIO34
100. 5.1.1 Monitor sources34
101. 5.1.2 Adjusting volume34
102. 5.1.3 Talkback34
103. 5.1.4 Near-field monitors34
104. 5.2 Meters34
105. 5.3 2-track monitoring35
106. 5.4 SOLO35
107. 5.4.1 Inplace solo defeat35
108. 5.4.2 Solo mode35
109. 5.4.3 PFL level36
110. 5.4.4 To clear all soloed channels36
111. 08-SURRO~Y9.FM.pdf
112. 6 - Surround modes37
113. 6.1 Selecting a surround mode37
114. 6.1.1 Selecting a buss pattern37
115. 6.2 Monitoring issues38
116. 6.3 Buss delay38
117. 6.4 Modules in the surround mix38
118. 6.4.1 Assigning modules38
119. 6.4.2 “Pan” controls39
120. 09-EFFEC~YH.FM.pdf